Beyond Epoxy.
The Polyaspartic Difference.
Traditional epoxy yellows, peels, and lifts under hot tires. Our polyaspartic system solves every one of those problems — and lasts 5x longer.
Get a Quote →5 Reasons Epoxy Disappoints
These are the same complaints we hear from homeowners replacing failed DIY and cheap-install epoxy floors.
It Yellows in Sunlight
Pure epoxy breaks down under UV light. White and light colors turn tan within 12 months in any garage with windows or open doors.
Hot Tires Lift It Off
When tires hit 60°C+ from highway driving, traditional epoxy softens and pulls up in patches. Polyaspartic stays bonded.
It's Brittle When Cold
Calgary winters drop epoxy temperatures well below its flexibility limit. The result: cracks and chips you don't see coming.
Single Layers Wear Through
Most epoxy installs are 1–2 thin layers. Daily traffic, snow shovels, and dropped tools cut right through to the concrete.
No Moisture Protection
Epoxy alone doesn't block hydrostatic pressure. Vapor from below pushes the coating up — bubbles, blisters, peeling.
Polyaspartic vs. Other Coatings
Not all garage floor coatings are equal. Here's how our 100% polyaspartic system compares to traditional options.
| Epoxy | Polyurea | BESTPolyaspartic | |
|---|---|---|---|
| Bonds strongly to concrete (no peeling) | ✗ | ✓ | ✓ |
| UV-resistant — won't yellow | ✗ | ✗ | ✓ |
| Flexible — prevents cracking | ✗ | ✓ | ✓ |
| Resistant to hot tire pickup | ✗ | ✗ | ✓ |
| Chemical & abrasion resistance | ✓ | ✓ | ✓ |
| Stays beautiful for years | ✗ | ✗ | ✓ |
| Cures in extreme temperatures | ✗ | ✓ | ✓ |
How We Build Floors That Last
Our system isn't a single product — it's six engineered layers that work together.
Diamond Grinding
Mechanical concrete preparation that opens pores 8–10x deeper than acid etching.
Crack & Joint Repair
Polyurethane filler bonds and seals existing cracks before any coating goes down.
Moisture Vapor Barrier
100% solids epoxy that blocks hydrostatic pressure from below.
Color Flake Broadcast
Custom flake blend broadcast to full saturation for seamless decorative finish.
Polyaspartic Top Coat
UV-stable, flexible, hot-tire resistant. The layer that makes the whole system work.
Optional Wear Coat
Polyurethane armor layer for workshops, gyms, and high-impact environments.
Frequently Asked Questions
Everything Calgary homeowners ask before booking a floor coating.
Most residential garages are completed in a single day. Larger spaces or basements with multiple rooms may take two days. You can walk on the floor the next morning and drive on it within 24 hours.
Epoxy is the oldest, cheapest, and most prone to peeling, yellowing, and hot tire pickup. Polyurea is more flexible but still yellows in UV light. Polyaspartic is the most advanced — UV-stable, flexible, fast-curing, and resistant to hot tires. Our system uses 100% solids polyaspartic for the top coat.
DIY kits are single-layer epoxy painted over unprepared concrete and typically last 1–3 years before peeling. Our system includes diamond grinding, a 100% solids moisture barrier, full flake broadcast, and a polyaspartic top coat — engineered to last decades with a 5-year warranty.
Yes — we install year-round. Polyaspartic coatings cure even in low temperatures. Once cured, the floor handles freeze-thaw cycles, road salt, and Alberta temperature swings without issue.
Yes — almost always. Our diamond grinding removes surface stains and weak layers, and we fill cracks with polyurethane filler before applying any coating. Even badly worn or oil-stained concrete can be transformed.
Yes — and we do this for you on every job. If moisture levels exceed 1% (very common in Calgary basements), we install a dedicated moisture vapor barrier to prevent future blistering or delamination. Skipping this step is one of the most common reasons cheap floors fail.
Pricing depends on size, condition of the concrete, package level, and finish. Most 2-car residential garages fall within a typical range, and we provide an exact quote after a free in-home assessment. Use our quote builder to get started.
Just empty the space — we handle the rest. Remove vehicles, shelving, and stored items. We cover walls and adjacent surfaces, vacuum continuously during grinding, and clean up completely before leaving.
Easy — sweep or dust mop regularly, and wash with a pH-neutral cleaner or mild soap. Avoid harsh acids or abrasives. Place a mat under tires in winter to catch road salt. That's it.
Properly installed polyaspartic coatings don't yellow under UV light, don't pick up hot tire marks, and bond strongly enough to resist peeling. With our prep process and 5-year warranty against delamination, you're protected if anything does go wrong.
We guarantee against delamination caused by product failure. If the coating loses adhesion during the warranty period, we repair it at no cost. The warranty doesn't cover concrete movement, structural cracks, physical damage, or chemical exposure beyond product tolerance.